瀏覽人次: 1797588
基本資料   
莊賀喬 教授
Ho-Chiao Chuang
聯絡資料 實驗室連結: 電子信箱: hchuang@ntut.edu.tw
聯絡電話:無
現職 臺北科大/機械工程系
授課資訊 連結
Top
期刊論文   
  • "Study on a fan coil unit and chiller by an intelligent control method with a stepless variable speed driving technology", Building and Environment, 115, SCI, 2018/02/01
  • "Application of Ultrasound Image Tracking Algorithm for Real-time Diaphragmatic Excursion Measurement", Journal of Medical and Biological Engineering, -58, SCI, 2017/12/01
  • "Energy saving technique for natural stone cutting machine by constant speed control in stone industry", Journal of the Chinese Institute Engineers, 45-49, SCI, 2017/12/01
  • "Feasibility study on sc-Ar electroplating for metal coatings fabrication", Surface Engineering, 19-28, SCI, 2017/11/01
  • "Development of an in vitro diaphragm motion reproduction system", Physica Medica-European Journal of Medical Physics, 11-20, SCI, 2017/09/01
  • "The effects of Ultrasonic Agitation on Supercritical CO2 Copper Electroplating", Ultrasonics Sonochemistry, 37-43, SCI, 2017/09/01
  • "Dynamic modulation of voltage excitation angle to optimize energy consumption of refrigerator", International Journal of Refrigeration, 2235, SCI, 2017/07/01
  • "Tracking and compensation of respiration pattern by an automatic compensation system", Medical Physics, 25045, SCI, 2017/06/01
  • "The Effect of Surfactant Content over Cu-Ni Coatings Electroplated by the sc-CO2 Technique", Materials, 428, SCI, 2017/04/01
  • "Fabrication of Though-Silicon Via Arrays by Photo-Assisted Electrochemical Etching and Supercritical Electroplating", Journal of Micro/Nanolithography, MEMS, and MOEMS, 014501, SCI, 2017/01/01
顯示/隱藏更多內容 Top
研討會論文   
  • "Compensation of respiration baseline shift by an automatic compensating system", 2018 World Congress on Medical Physics and Biomedical Engineering (IUPESM 2018), 布拉格, 2018/06/03
  • "Material characterization in TSV fabricated by supercritical carbon dioxide electroplating", 2018 International Conference on Electronics Packaging (ICEP 2018), 名古屋, 2018/04/17
  • "Through-Silicon Via Arrays Manufactured by Photo Assisted Electrochemical Etching and Super-Critical Electroplating Process for Solid Oxide Fuel Cell Application", 19TH INTERNATIONAL SYMPOSIUM ON ECO-MATERIALS PROCESSING AND DESIGN (ISEPD 2018), Jaipur, 2018/02/21
  • "三段AC馬達與無段變速BLDC用於送風機之比較與分析", 106年度中國機械工程學會年會暨第34屆全國學術研討會, 台中, 2017/12/01
  • "溫度對於電鍍鎳銅合金薄膜特性影響之研究", 中華民國力學學會年會暨第40屆全國力學會議, 台南, 2017/11/25
  • "筆記型電腦內部樞軸盤型彈簧常數之研究", 2017 台灣精密工程科技研討會, 虎尾, 2017/11/24
  • "單一細胞層級顯微鏡自動對焦系統設計", 2017 生物醫學工程科技研討會, 中壢, 2017/11/17
  • "Through-silicon via arrays manufactured by photo assisted electrochemical etching and copper electroplating under SC-CO2 environment", The 19th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2017), Kaohsiung, 2017/06/18
  • "雙軸向呼吸運動補償系統之開發與可行性評估", 2017國際智慧醫療診斷器材研討會暨 第二十二屆化學感測器科技研討會, 台南, 2017/05/20
  • "Material Characterization in Thin Film and TSV Fabricated by Supercritical CO2 Fluids Electroplating Technique", 2017 IEEE International Conference on Applied System Innovation (ICASI 2017), 札幌, 2017/05/13
顯示/隱藏更多內容 Top
指導學生論文   
學生姓名 畢業年度 論文名稱 摘要 連結
張惇盛 106 以超臨界二氧化碳無電流電鍍方法應用於盲孔陽極氧化鋁模板製作出高深寬比鎳奈米線
周怡良 105 二維呼吸運動補償系統應用在放射線治療期間呼吸運動校正之可行性研究
吳玉鵬 105 二維放射線劑量分佈模擬程式應用於腫瘤治療期間劑量分佈評估之可行性研究
張博雅 105 外用型微氣泡結合雷射於經皮穿透 之應用
何宗達 105 多層有機電路板製程改良之研究
吳冠霖 105 超音波攪拌應用於超臨界二氧化碳流體電鍍銅之影響
紀榕宏 105 直流無刷馬達以無段變速驅動技術應用於室內送風機風量之調節
張魁元 105 以感測回饋最佳化結合無段變頻技術應用於空調製冷系統
鄭翔云 104 丁炔二醇應用於超臨界二氧化碳之鎳銅合金電鍍製程探討
鄧羽傑 104 以超臨界流體電鍍製程填充電容式微加工超音波轉換器之矽穿孔結構
顯示/隱藏更多內容 Top